## Logback Demo

Welcome to the logback demo! This document will take you through a tour of some of logback's major features.

### Installation

First, please download the logback demo. You will need to install a Subversion client and issue the following command on a console:

svn co http://svn.qos.ch/repos/logback-demo/tags/STABLE logback-demo

This will checkout a copy of the logback demonstration web-application to a directory called logback-demo. The logback demo can be packaged as a war file and deployed to an application server. We strongly recommend the use of Maven2 to accomplish this task, since it takes a single command in order to compile, package and run this demo.

Using Maven, let's package the files and run the demo for the first time. From the logback-demo directory, issue the following command:

    mvn package jetty:run

Then, visit http://localhost:8080/logback-demo/ to view the main page of the logback demo.

### Logback-classic

By default (or as packaged), logback-demo configures logback-classic with two appenders: a `ConsoleAppender` and a `RollingFileAppender`. The `RollingFileAppender` sends logging events to a file called logFile.log and will rollover the active file every minute. The old file will be renamed and compressed to a zip file. The `ConsoleAppender` will output the logging requests to the console, and shorten the logger names to gain space on the console window, without loss of legibility. For example, `ch.qos.logback.demo.prime.NumberCruncherImpl` will be abbreviated as `c.q.l.d.prime.NumberCruncherImpl`.

We highly encourage you to study the logback.xml configuration file located under the src/main/resources/ folder. You might want to keep this file open in an editor window, since we will modify its contents thoughout the demo.

Let us now visit the ViewStatii page, via the navigation menu on the left hand side of your browser's window. This page contains the content of the `Status` objects that were created up until now. `Status` objects are a part of logback's internal reporting framework. They allow you to see what is going on inside logback, and check that a configuration file has been parsed correctly, or that rollovers occur as expected.

You should be seeing log messages printed on the console and the contents of "logFile.log" file rolled over every minute.

If you visit the View logs page (by clicking on the link located in the menu on the left), you should see it has no content. Let us change that by uncommenting two parts in the config file.

Remove the comments around

<!-- Basic Cyclic buffer <appender name="CYCLIC" class="ch.qos.logback.core.read.CyclicBufferAppender"> <MaxSize>512</MaxSize> </appender> -->

and around

<!-- Part I: Basic Cyclic buffer <appender-ref ref="CYCLIC" /> -->

The `<appender-ref>` element found at the end of the configuration file links an appender to a given logger, in this particular case the root logger.

A `CyclicBuffer` keeps track of the incoming logging event stream in a circular buffer for later display. After having removed the comments around the two element/s shown above, reload the logback-demo web-application by exiting the previous "mvn" command with CTRL-C and issuing it again:

mvn package jetty:run

This time the View logs page should have contents.

By virtue of `CyclicBufferAppender`, this page can fetch the last events and present them through a servlet. We see that every ten seconds a line is added to the logs. The formatting of this page is made with a `HTMLLayout`. This component creates a table containing logging events, based on a pattern that describes the information you wish to see in the table.

Having the logs cluttered with repetitive Howdydy-diddly-ho messages is wasteful. We can get rid of them with an appropriate filter. Uncomment the block entitled Cyclic buffer with Evaluator. You should then comment the block entitled "Basic Cyclic buffer" that we uncommented earlier.

Let's take a look at the filter we've just added:

<filter class="ch.qos.logback.core.filter.EvaluatorFilter"> <evaluator name="loggingTaskEval"> <expression> logger.getName().contains("LoggingTask") &amp;&amp; message.contains("Howdydy-diddly-ho") &amp;&amp; (timeStamp - event.getStartTime()) >= 20000 </expression> </evaluator> <OnMatch>DENY</OnMatch> </filter>

The `<expression>` element uses the familiar Java language syntax. It checks that the name of the logger contains the String LoggingTask, but also that its message contains the string Howdydy-diddly-ho. Moreover, in order to be sure that the Howdydy-diddly-ho task actually works, we add a last condition which checks that that at least 20 seconds have elapsed after application launch. The variable references in the expression, namely (`logger`, `message` and `event`) are implicitly made available by logback. The `<OnMatch>` element lets the user specify the filter's behaviour once the expression matched (evaluated to true).

After a restart, the Vew logs page will shows the Howdydy-diddly-ho logs, but only for the first 20 seconds. If you wish to see new logging events to be shown on the "View logs" page, then visit the "Prime number" page.

#### Turbo Filters

Logback supports a special category of filters called TurboFilters. `TurboFilter` objects are ultra-fast, context-wide filters. They can be very useful by setting context-wide (i.e. global) conditions for enabling or disabling logging events.

Remove the comments around the block entitled "TurboFilter: MDC value".

<turboFilter class="ch.qos.logback.classic.turbo.MDCFilter"> <MDCKey>username</MDCKey> <Value>sebastien</Value> <OnMatch>ACCEPT</OnMatch> </turboFilter>

This `<turboFilter>` element adds a `TurboFilter` to the logging context which will enable events if the MDC contains a key named "username" set to the value "sebastien". The logback-demo application contains a servlet filter which will set the MDC key "username" with the name of the currently logged in user.

For the purpose of this demo, let us disable all logging by setting the root logger's level to `OFF`.

<root> <level value="OFF"/> ... </root>

Now restart the server as before.

Once on the main demo webpage again, perform a number of actions (e.g. calculate a few prime numbers) and visit the View logs page. The table should be empty.

Now login to the logback-demo web-application with the username sebastien and perform a few prime computations. The View logs page should show the logging events that were generated. Moreover, each logging event will have an MDC field associated with the name of the logged in user, in this case, sebastien. Please log off before continuing the demo, using the logout button on the left.

#### Parameterized logging

Parameterized logging is not a logback feature per se. It is part of SLF4J. Usually, a logging request is issued as follows:

    logger.debug("Hello, my name is" + username + ", I am " + age + " years old.");

In the above call, the cost of constructing the message of type String is borne even if the log request is disabled.

SLF4J offers the following alternative:

    logger.debug("Hello, my name is {}, I am {} years old", username, age);

In this alternative, the final log message will be formatted only if the log statement is enabled.

At present, let us see what kind of gain we can expect from this alternative approach. First, go to the Prime number page and compute factors for integers of your choice. Check the time it takes to compute the results. To see a clearer difference between the two formatting methods, you might want to try the two big integers that are listed below the prime number textbox. Jot down the time it takes to compute the result.

Now let us edit the `NumberCruncherImpl` class in order to use parameterized logging. You will find this class in the src/main/java/ch/qos/logback/demo/prime/ directory. Comment line 54 (doing unconditional message concatenation) and uncomment line 55 (parameterized logging). Restart the server with mvn package jetty:run and re-run the factorization you tried beforehand.

The time required to complete the computation should be much lower this time. Remember that we have turned off all logging in the previous step of this demo. In the initial version, we were constructing the message ("Trying "+i+" as a factor.") each time a factor was tested. With the parameterized logging, the construction of the message was postponed and, since logging was turned off, never done. Thus, parameterized logging can significantly reduce the cost of disabled log statements.

#### Markers

You can color log statements with markers. Markers are part of the SLF4J API. If you look at the LoggingTask class (part of logback-demo) which includes the Howdydy-diddly-ho log statement, you should see that it is bound to a marker named `HOWDY` marker. If you wish to drop log statements bearing the `HOWDY` marker, you can use this `TurboFilter` to do so:

<turboFilter class="ch.qos.logback.classic.turbo.MarkerFilter"> <Name>HOWDY_FILTER</Name> <Marker>HOWDY</Marker> <OnMatch>DENY</OnMatch> </turboFilter>

After you have set the root logger's level back to DEBUG and uncommented the MarkerFilter block in logback.xml, restart the server.

The logs bearing the Howdydy-diddly-ho message should no longer appear as they are associated with a HOWDY marker. You can check that by visiting the View Logs page.

## Logback Access

Access logging is another important feature offered by logback. By default, the logback-demo web-application is configured so that each time you access it, an access log is printed on the console. The details of access logs are configured by the logback-access.xml file located under the src/etc/ directory.

Here is a rather minimal configuration for logback-access:

    <configuration>

      <appender name="STDOUT"
        class="ch.qos.logback.core.ConsoleAppender">
        <layout class="ch.qos.logback.access.PatternLayout">
          <Pattern>%h %l %u %t \"%r\" %s %b</Pattern>
        </layout>
      </appender>

      <appender-ref ref="STDOUT" />

    </configuration>

Note that logback-classic and logback-access are configured via different files: logback.xml and logback-access.xml respectively. If you wanted to turn off logging for logback-classic by setting the level of the root logger to OFF, logback-access would be unaffected by this change.

To see the logs produced by logback-access, just visit a few pages and look at your console. The information contained in each line has been specified in the configuration file. The `ConsoleAppender` named STDOUT contains a `PatternLayout` component. This layout component is used in logback-classic to display either the message, logger name or level of the request, but in logback-access it is used to display the request method, requested page, status code and many other fields.

Here is a sample output for this appender.

    127.0.0.1 - - 22/01/2007:14:35:40 +0100 GET /logback-demo/ViewStatii.do HTTP/1.1 200 3660
    127.0.0.1 - - 22/01/2007:14:35:41 +0100 GET /logback-demo/index.jsp HTTP/1.1 200 2389
    127.0.0.1 - - 22/01/2007:14:35:42 +0100 GET /logback-demo/lastLog/ HTTP/1.1 200 948
    127.0.0.1 - - 22/01/2007:14:35:42 +0100 GET /logback-demo/index.jsp HTTP/1.1 200 2389
    127.0.0.1 - - 22/01/2007:14:35:43 +0100 GET /logback-demo/prime.jsp HTTP/1.1 200 1296
    127.0.0.1 - - 22/01/2007:14:35:44 +0100 GET /logback-demo/index.jsp HTTP/1.1 200 2389
    127.0.0.1 - - 22/01/2007:14:35:45 +0100 GET /logback-demo/lottery.jsp HTTP/1.1 200 1209
    127.0.0.1 - - 22/01/2007:14:35:46 +0100 GET /logback-demo/index.jsp HTTP/1.1 200 2389
    127.0.0.1 - - 22/01/2007:14:35:48 +0100 GET /logback-demo/reload.jsp HTTP/1.1 200 1335
    127.0.0.1 - - 22/01/2007:14:35:49 +0100 GET /logback-demo/index.jsp HTTP/1.1 200 2389
    127.0.0.1 - - 22/01/2007:14:35:54 +0100 GET /logback-demo/login.jsp HTTP/1.1 200 1214
    127.0.0.1 - - 22/01/2007:14:35:55 +0100 GET /logback-demo/Logout.do HTTP/1.1 200 1000

#### Filtering

In this next part, we are going to add some information to the console. Let us imagine that we want to log the numbers that are tried on the Lottery page. We will need a second `ConsoleAppender` that will only print a given information (e.g. the guessed number, along with some hints about the player). The appender will also have to print that information only when a certain page is accessed.

The necessary configuration lines are listed below.

<appender name="STDOUT_LOTTERY" class="ch.qos.logback.core.ConsoleAppender"> <filter class="ch.qos.logback.core.filter.EvaluatorFilter"> <evaluator name="lotto_eval"> <Expression> url.matches(event.getRequestURL().toString()) </Expression> <matcher name="url"> <regex>Lottery.do</regex> <caseSensitive>false</caseSensitive> </matcher> </evaluator> <OnMatch>ACCEPT</OnMatch> <OnMismatch>DENY</OnMismatch> </filter> <layout class="ch.qos.logback.access.PatternLayout"> <Pattern> LOTTERY: %A [%r] Guess=%reqParameter{guessed_number} </Pattern> </layout> </appender>

This appender will use a `PatternLayout` to format its output. The %reqParameter conversion word is used to extract the guessed number from the request, and print it.

It also uses an `EvaluatorFilter` that will prevent the appender to display anything when the access' request url does not match the given expression. You can see that it is easy to specify a RegExp, name it and use it in the expression that will be evaluated. In that case, we only entered the name of the lottery.do action.

Let us uncomment the two elements with the Lottery to Console comments and restart the server. Now, try to play the lottery. You will see more lines in the Console that you've seen until now. At every try, logback will produce a log as shown below:

LOTTERY: 192.168.1.6 [POST /logback-demo/Lottery.do HTTP/1.1] Guess=321

#### Sending emails

Logback-access provides several components that are usually used by the classic module. For example, a `SMTPAppender` can be used to send an email when a specific event occurs. Here, we will contact the lottery administrator each time a winner is detected. To achieve this, we will add a `SMTPAppender` to the existing configuration. Please uncomment the part of logback-access.xml named Lottery to Email. Do not forget to uncomment the appender-ref element at the end of the configuration file that references the SMTP appender. In the appender element, notice the use of a `URLEvaluator`. This evaluator allows us to specify one or more URLs that are to be watched. When one of them is accessed, an email is sent.

A reload of the configuration has to be done before we can test this new component. Once done, try to play the lottery with the number 99. You should see a "congratulation" message but, most importantly, the specified recipients should have a new mail in their mailbox. The content of the email is a nicely formatted HTML table with information about the accesses that occurred before the triggering event.

### JMX

Logback publishes several components via JMX. This allows you to see the status of certain objects, and change several configuration parameters. Publishing logback's components via JMX is possible with Jetty and Tomcat. For more information about the JMXConfigurator please refer to the relevant chapter in the manual.

Let us test setting levels using the configurator. The Prime Number page requests two types of logs. When the calculation checks if a number is a factor, a DEBUG log is displayed. When the calculation has found a factor, a INFO log is displayed.

Let us first set the level of the logger named ch.qos.logback.demo.prime to DEBUG. Run a prime calculation directly, without restarting the server. The View logs page should show the DEBUG and INFO logs.

Now, if you set the level of the ch.qos.logback.demo.prime logger to INFO, and run a prime calculation again, you should not see the DEBUG level logs anymore.

This demo of logback is now over. Do not hesitate to play around with the configuration files. You might want to check the logback documentation page for more information about any component you'd like to test.